If you have a web site as well as an web application, speed is vital. The swifter your web site loads and also the speedier your applications work, the better for everyone. Since a website is only an offering of files that talk with each other, the systems that keep and work with these data files play a huge role in web site operation.

Hard disk drives, or HDDs, were, until the past several years, the more effective products for saving information. Nevertheless, recently solid–state drives, or SSDs, are actually gathering popularity. Look into our evaluation chart to check out if HDDs or SSDs are more appropriate for you.

1. Access Time

Due to a revolutionary new approach to disk drive operation, SSD drives permit for much faster file access speeds. With an SSD, data accessibility instances are much lower (as small as 0.1 millisecond).

HDD drives continue to utilize the same fundamental file access technique that was actually created in the 1950s. Despite the fact that it has been considerably advanced since then, it’s slow compared to what SSDs will offer. HDD drives’ file access speed can vary between 5 and 8 milliseconds.

2. Random I/O Performance

Due to the same radical technique which allows for a lot faster access times, you too can appreciate far better I/O efficiency with SSD drives. They can conduct double as many operations within a specific time in comparison to an HDD drive.

An SSD can manage at the least 6000 IO’s per second.

All through the same lab tests, the HDD drives confirmed to be much slower, with only 400 IO operations managed per second. Although this seems to be a good deal, if you have a busy web server that serves lots of famous websites, a slow hard disk can lead to slow–loading sites.

3. Reliability

The absence of moving components and rotating disks in SSD drives, as well as the current advancements in electrical interface technology have generated a considerably risk–free data file storage device, having an average failure rate of 0.5%.

As we have previously observed, HDD drives depend on rotating hard disks. And anything that utilizes many moving components for prolonged intervals is prone to failing.

HDD drives’ average rate of failing can vary between 2% and 5%.

4. Energy Conservation

SSD drives work practically soundlessly; they don’t make excessive heat; they don’t require more cooling down solutions and then consume less energy.

Lab tests have demostrated the average electricity use of an SSD drive is between 2 and 5 watts.

HDD drives are famous for staying noisy. They need further electrical power for cooling purposes. Within a web server containing a variety of HDDs running all of the time, you will need a lot of fans to make sure they’re cooler – this makes them much less energy–effective than SSD drives.

HDDs consume in between 6 and 15 watts.

5. CPU Power

The swifter the data file accessibility rate is, the faster the data demands will likely be treated. Because of this the CPU won’t have to reserve allocations waiting for the SSD to answer back.

The average I/O wait for SSD drives is barely 1%.

In comparison with SSDs, HDDs enable slower data access rates. The CPU must lose time waiting for the HDD to come back the demanded file, scheduling its allocations while waiting.

The regular I/O delay for HDD drives is around 7%.

6.Input/Output Request Times

Almost all of DomainSpaceRegistry’s completely new servers now use exclusively SSD drives. Our very own lab tests have demonstrated that utilizing an SSD, the common service time for any I/O request although performing a backup continues to be below 20 ms.

Throughout the same trials with the exact same web server, this time around fitted out using HDDs, overall performance was much sluggish. Throughout the server backup procedure, the normal service time for I/O demands fluctuated somewhere between 400 and 500 ms.

7. Backup Rates

Discussing back ups and SSDs – we have observed an exceptional improvement with the data backup rate as we transferred to SSDs. Now, a standard server data backup requires merely 6 hours.

On the flip side, on a server with HDD drives, a comparable back–up will take 3 to 4 times as long to complete. A full backup of an HDD–equipped hosting server normally takes 20 to 24 hours.

Our Linux VPS and additionally our regular Linux cloud website hosting accounts offer SSD drives by default. Join our DomainSpaceRegistry family, and see how we can help you help your website.

  • Service guarantees

  • DomainSpaceRegistry’s Virtual Private Servers come with no installation service fees and function in a reliable network offering 99.9% of uptime. Full root access warranted.
  • Compare our prices

  • Take a look at our price list and pick the perfect Virtual Private Server for your active websites. You’re able to migrate to a more advanced VPS configuration with simply a click.
  • Compare our hosting plans
  • Contact Us

  • Our representatives are available for you night and day to reply to any sort of questions concerning our VPS solutions. 60–min reply time guarantee.